Aller au contenu principal

The Kenmore 90 Series is a washing machine manufactured by Kenmore.

Questions au sujet de 232 Voir tout

The washer does not spin out fully leaving the jeans wet

We have a series 90 Heavy Duty washer, model number 110.92591220, and following the spin cycle our jeans and heavy garments still are wet and require a longer dying time.

What could cause this change of washer performance?

Répondez à cette question J'ai le même problème

Cette question est-elle utile ?

Score 7
Ajouter un commentaire

Fix Kits pour batterie de MacBook

À partir de $69.99

Buy Now

Fix Kits pour batterie de MacBook

À partir de $69.99

Buy Now

11 réponses

Bill Tuszynski, this is a direct drive model. There is no drive belt etc. If the motor coupling would have failed, it would not agitate etc. This sounds absolutely like a slipping clutch. I just replaced one of those a few weeks ago for identical reason. Check this guide.

Cette réponse est utile ?

Score 1
Ajouter un commentaire
Réponse la plus utile

Brian Caylor, here is my answer to a very similar question:"this is a direct drive model. There is no drive belt etc. If the motor coupling would have failed, it would not agitate etc. This sounds absolutely like a slipping clutch. I just replaced one of those a few weeks ago for identical reason. Check this guide."

Cette réponse est utile ?

Score 1
Ajouter un commentaire

I hv a 110 series and it's not spinning all the water out & clothes are still really wet. What could be causing this ? Thank you.

Cette réponse est utile ?

Score 1

Commentaires:

I have a 110 series and will not soon all the water out, clothes still come out really wet. What could be causing this ? Thank you Sammy

par

Ajouter un commentaire
Cette réponse est à l'origine d'une autre question .

I have the same problem and determined the issue to be a faulty lid switch. When the lid is down a pin pushes down on the lid switch. With the switch being bad it thought the lid was up and prevented spin. I used a screwdriver and was able to get the spin cycle to kick in.

Cette réponse est utile ?

Score 0

Commentaires:

Sorry, I just re read your post and your problem is a little different; mine wouldn't drain or spin

par

Ajouter un commentaire
Cette réponse est à l'origine d'une autre question .

The question does not make sense, if it's spinning and draining you should be OK. My thought is that you have a restricted drain hose or clogged coin trap and it's draining but not completely.

Water Pump Belt

If the washer won't drain the pump belt might have broken or might have worn out. Check the belt and replace if it shows signs of excessive wear.

Drain Pump

If the washer won't drain water the drain pump might be defective. It's also common for a small sock or other article of clothing to get caught in the drain pump or in the drain hose. Check both for an obstruction before replacing the pump.

Other Causes and Conditions

Clogged Pump or Hose

If the washer won't drain there might be a clogged pump or hose. It's common for small socks or other small clothing items to get into the water drain system and clog the hose leading to the pump or the pump itself. Remove the hoses from the pump in order to remove the article of clothing. Keep in mind that any water in the washer will pour out of the hoses when removed.

Cette réponse est utile ?

Score 0

Commentaires:

My Kenmore washer 101.21102011 works fine, except the clothes soaked wet at the end of complete cycle. Spinning & draining are good. What is "restricted drain hose" or "water pump belt"?

par

Ajouter un commentaire
Cette réponse est à l'origine d'une autre question .

Never figured out what was wrong. Water wasn't clogged up anywhere, the drain pump was working fine. We ended up just buying a new washer.

Cette réponse est utile ?

Score 0
Ajouter un commentaire

I had this issue with an LG and found I had a clogged filter seems I thought it would clean itself :)

Cette réponse est utile ?

Score 0
Ajouter un commentaire

I have a 2012 kenmore washer with a push button start the button is not always engaging and the cycle does not always complete a spin cycle should I get a repair technition or just buy new machine

Cette réponse est utile ?

Score 0
Ajouter un commentaire

Several possible problems..... One something stuck in pump blocking water (ie sock, hair band etc) or the item being washed is one heavy item causing the washer to be unbalance (ie one pair of jeans or one towel...heavy when wet) and this causes the washer to stop before item is done spinning because it is an off balance load or lastly too much sudds, washer can not drain sudds so shuts down the spin cycle early, like when off balance (use less detergent for small loads to avoid too much sudds)

Cette réponse est utile ?

Score 0
Ajouter un commentaire

My wash machine doesn't let all the water out and my clothes are soaking wet what does it mean

Cette réponse est utile ?

Score 0
Ajouter un commentaire

My whirlpool washer will not spin, the water drains out, I can hear the humming sound when on spin cycle

Cette réponse est utile ?

Score 0

Commentaires:

I would look at replacing the lid switch @lisacrockham

par

Ajouter un commentaire

Ajoutez une réponse

Bill Tuszynski sera éternellement reconnaissant.
Voir les statistiques:

Dernières 24 heures : 81

7 derniers jours : 410

30 derniers jours : 2,161

Total : 57,090