Cellular and WiFiAntenna Cables, sockets they plug into on Logic Board

Review this IFIXIT guide: iPad 3 4G Logic Board Replacement. Jump to Step 39 for the ribbon cable for the headphone and Cellular antennas & 41 for the WiFi.

Cette réponse est-elle utile ?

Oui Non

Indice 3

2 commentaires:

Its the connectors in Step 44 I'm concerned with, just eye-balling a photo isn't really helpful as no one has them "digitally labelled" for which component they go to and I just want to be absolutely sure they're connected into the right sockets... I'm still getting "Searching..." and "No Signal" even after replacing the Left and Right Antenna's at the top and also the Sim Card Reader :(

19 mai 2015 par chrismitchellclare

OK, Here's the other side image to guide you: Bluetooth & WiFi cables Note the direction the cables feed from thats the only clue. Referring to the picture: The top cable goes to the Right side, The middle to the Left and the bottom goes just under the lip of the Cellular antenna frame.

19 mai 2015 par Dan

Ajouter un commentaire

Its the connectors in Step 44 I'm concerned with, just eye-balling a photo isn't really helpful as no one has them "digitally labelled" for which component they go to and I just want to be absolutely sure they're connected into the right sockets... I'm still getting "Searching..." and "No Signal" even after replacing the Left and Right Antenna's at the top and also the Sim Card Reader :( — chrismitchellclare
OK, Here's the other side image to guide you: Bluetooth & WiFi cables Note the direction the cables feed from thats the only clue. Referring to the picture: The top cable goes to the Right side, The middle to the Left and the bottom goes just under the lip of the Cellular antenna frame. — Dan

iPad 3 4G

Cellular and WiFiAntenna Cables, sockets they plug into on Logic Board

1 Réponse

Ajouter une réponse