Aller au contenu principal

Version revisitée de l'iPhone 3G avec une vitesse de traitement plus élevée. La réparation de ce modèle est similaire à celle du 3G et nécessite de simples tournevis et outils pour faire levier. Modèle A1303 / capacité de 16 ou 32 Go / coque en plastique noir ou blanc.

1502 questions Voir tout

Home button not working.

I'm having trouble with my home button... Anyone know what the resistance across the button's two leads should be?

I measured 6.3k across with the button pushed down. And I'm suspecting that is the issue. Should the leads go to 0? I may have a problem on the doc side too. The reading across those leads is 47ohms. I thought this was a little low.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 2
1 commentaire

I noticed you never got an answer to this. Are you still having this problem?

par

Ajouter un commentaire

5 Réponses

Solution retenue

I was able to isolate the weak short to the mother board. Instead of replacing the phone I was able to jail-break it so I can now use slide gestures to simulate a home button press. Phone is working fine, but I'm wondering how long it will be until that short reveals it's negative effect on other circuitry. With any luck it's isolated to the home button.

Cette réponse est-elle utile ?

Indice 2
Ajouter un commentaire

I had the same issue. I opened up my iphone with help of this website(Thanks to them) Then i saw under the home button is and one of the matel bit was broken so it was not touching the circuit borad.

Have a look at it may be that is the issue.

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire

i had a similar problem, but the home button seems good, so i changed the speaker module. it works fine now.

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire

ive had that problem and what worked for me a couple time is try lifting the little tabs behind the button that makes contact , carefully lift them and if that doesnt work you can always replace the button or use the jailbroken app called ( Activator ).

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire

In a similar way to Jay and Albert, I simply cleaned off the contacts between the display and dock connector. Then I bent the small metal tabs on the display positioned opposite the two metal pads on the dock connector (this is what connects the home button). After that, the button worked fine.

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire

Ajouter une réponse

Rich sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 17

Total : 9,458