Rep: 1
1
My G5 won't power up. The power supply has been replaced and I've been told that the processors need replacing. How can I get the data from the Hard Drive?
Thanks in advance.
Cette question est-elle utile ?
Rep: 685,3k
3,4k
1,1k
2,6k
Use an external enclosure or a Universal adapter, plug the drive into it and attach to another Mac.
Processors need replacing, very questionable diagnostic.
To address your problem please give us the last three figures of your serial number.
Cette réponse est-elle utile ?
Thank you for your response. The G5 serial is CK415J7LRSJ.
The last numbers on the processors are T6418.
Please check that serial number again.
CK415J7LRSJ the last S could be a 5, sorry my eyes aren't that good
Is was a 5. Apple Power Macintosh G5 1.8 DP (PCI-X) Specs
Identifiers: Original/Late 2003 - M9393LL/A - PowerMac7,2 - A1047 - 1969
Please ask another question, just about the PowerMac. Replacing the processor is probably cost prohibitive. Meanwhile we might be able to tell from the diagnostic lights what the actual problem is. When asking please give all symptoms, sounds and lights you get. Several are available on eBay for just over $100 with shipping and may just need your video card and a hard drive. This one (sans hard drive and RAM) came out of NASA and was probably well maintained : http://www.ebay.com/itm/Apple-Power-Mac-...
Dernières 24 heures : 0
7 derniers jours : 2
30 derniers jours : 3
Total : 443
