Aller au contenu principal

Upgraded version of the Ascend P6, featuring a 4.7" 720P LCD display, a quad-core processor, and 2 GB of RAM. Released in 2014.

7 questions Voir tout

Power up problem on huawei ascend P6

Hi,

I have a problem with the power up of the mobile ascend p6 , its showing the first logo but than it turns off again but on charger is going on normally and can be used normally but when I unplug it it goes off again.

Thanks in advance.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

2 Réponses

Solution retenue

If the phone is only functioning when plugged in, the phone is not holding a charge. The battery is most likely faulty, and the best course of action is to obtain a new battery and replace the old one.

How old is the Phone ?

Cette réponse est-elle utile ?

Indice 0

5 commentaires:

For about 3mnts but my daughter through it in the diesel , i changed the screen and it was turning on but now is doning continues restarting

par

Did you try to charge that Huawei with a USB cable to a laptop ?

which shows the battery indicator in the status bar when you loaded the phone via USB after 1 hour

Maybe the battery connector is loosen

par

Its 96% but it doing continues reboot, how can i stop it pls ?

par

And the phone righg now is without the bottom cover the curved one could it effect on the phone or no pls ??

par

here a introduction for a factory reset ----> you will lost all your data on the phone !!!!

have you a backup ?

http://www.hardreset.info/devices/huawei...

good luck

PS. the bottom cover has no effect on it

par

Ajouter un commentaire

Why my huwei p6 is switched off and on by itself.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

Rodania Bugeja sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 912