Aller au contenu principal

Annoncé le 22 octobre et disponible le 12 novembre 2013. L'iPad mini 2, également connu sous le nom d'iPad mini avec écran Retina, possède autant de pixels que l'iPad Air dans un format plus petit de 7,9 ".

426 questions Voir tout

New instalment of lcd and digitiser problem

Upon installation of a new lcd and digitiser on an ipad mini 2 there seems to be a problem with the lcd touching the Base of the digitizer.

It doesn't happen straight away but over a few hours with no usage of unit.

It seems to be in the middle of the display, and nowhere near the edges.

I've changed the digitizer twice, thinking it was that, but it's still happening.

Installation had zero issues, and I've taken it out twice, but it's still happening.

Please help.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 1
1 commentaire

Probably not enough adhesive between the digitizer and the LCD.

par

Ajouter un commentaire

2 Réponses

Réponse la plus utile

I would suspect something pushing it out since it's in the middle, like a swollen battery.

Cette réponse est-elle utile ?

Indice 2

1 commentaire:

I did check that. The battery seems fine. Sits flat etc. It happens a good few hours after installation.

I've purchased another lcd to check if it was that.

par

Ajouter un commentaire

you might be dealing with it being bad adhesive or you're getting non genuine digitizers. if it is bad adhesive, apply your own CLEAR adhesive!!!!!!!!!!!!!!!!!!!

Cette réponse est-elle utile ?

Indice 0

1 commentaire:

I agree it's not a genuine digitizer but an aftermarket one. I've used aftermarket ones before, with no problems what so ever.

The adhesive hols the screen in fine though. There's no lifting or movement.

par

Ajouter un commentaire

Ajouter une réponse

shaun7453 sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 151