hello guys
I swapped the GPU and added an SSD but i accidently damaged some contacts on the logic board these are forconnecting the display.
here some pictures:
How should I proceed
thank you
Thanks for the answers I got some knowledge in soldering I should be able to do the job if the bending doesnt help
Can anybody hit me up with a link where I can buy this part?
Thanks
Cette question est-elle utile ?
Rep: 37k
154
91
50
If they're just bent (I can't tell for sure because the picture is a bit blurry) I would recommend using something like a small flathead screwdriver and gently attempting to straighten them. If you get it close enough, the cable should mate to the connector without much issue. Those look like they're just contacts and not pins so they don't need to be perfectly straight. According to what I've read those pins are for display power so they're pretty important.
Cette réponse est-elle utile ?
Rep: 479,9k
35
329
971
You'll need to find someone to replace the connector for you. As they say plumbers can't do brain surgery, don't feel bad I'm a plumber too! ;-}
The only other option is to see if you can get a replacement logic board but that will be costly too.
Cette réponse est-elle utile ?
Dernières 24 heures : 0
7 derniers jours : 9
30 derniers jours : 12
Total : 243
