Rep: 13
1
1
I replaced the battery on an iphone 5s using the ifixit kit.
Everything is working fine except the power button. It clicks but the phone won't turn on/off.
Any ideas?
Cette question est-elle utile ?
Rep: 159,7k
11
191
368
First of all, double check if the volume button + power button ribbon that goes under the battery at the upper part of the battery is plugged into the connector on the logic board.
The power button + volume cable ribbon is most likely damaged from when the battery was being pryed up near the top left part. The only way to fix that is to replace the whole volume + power button ribbon cable.
You can get the part from here:
iPhone 5s Audio Control and Power Button Cable
Guide to replace the part:
Remplacement de la nappe des composants supérieurs de l'iPhone 5s
Cette réponse est-elle utile ?
If the issue is the "volume button + power button ribbon", wouldn't the volume buttons also not work? In this case, the volume buttons continue to work.
No not in all cases as the wiring in the cable is split up for those functions.
It's actually common for power button to go bad itself on iPhone 5 or 5s.
Rep: 13
1
Solution was to simply set the hour and date, by connecting it to iTunes.Same problem here, but solved
Cette réponse est-elle utile ?
What do you mean
Rep: 235
4
1
1
Better to start to power on using the line No7 / at j2 connecter (short with ground using tweezer), if power on , then change the power switch flex cable , if not working then check line 9 volt , it should be 1.8 v and if not check the line from AMBER PMU to the connector , following pics of mine will help:
Cette réponse est-elle utile ?
Dernières 24 heures : 0
7 derniers jours : 4
30 derniers jours : 15
Total : 6,967
