Réparez vos affaires Communauté Boutique

Third generation of iPad with Wi-Fi, released on March 16, 2012. Model Number A1416. Repair requires heating and careful prying.

154 questions Voir tout

Options

Bottom of screen not working

I've changed the screen on my iPad 3 and put a tiny crack in the new one when doing so. If you take the screen out and flip it over, the crack runs through the tiny silver coloured lines running around the edge of the screen just above the home button. Is this why the bottom of my screen will not work now? Or do they have nothing to do with it? I've tried to clean out the terminals where the tape connects in but that hasn't done anything.

It's literally the bottom half inch that doesn't work.

All help is much appreciated

Thanks

Dru

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
1 commentaire

If the crack is on the digitizer layer and not the black glass then yes you will need to replace the digitizer again.

par

Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

Hi,

Yes, this damage will cause the touch to stop working, or if you have damaged the cable by crushing it etc.

Get a replacement digitiser, and make sure none of the corners or side walls are dented, otherwise your new digitiser will always crack, due to the fact it doesn't fit correctly. :-)

Cette réponse est-elle utile ?

Oui Non
Indice 3

2 commentaires:

That's what it is!! The case is dented from where it has been dropped. I think I need to bend it out a little more in order for the screen to fit correctly. That must have caused the crack when I was replacing it.

Thanks a lot, really helpful!!

par

Not a problem! Glad I could help :-)

par

Ajouter un commentaire

Ajouter une réponse

Dru sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 72,962