Aller au contenu principal

Sorti le 25 septembre 2015. Modèle A1688/A1633. La réparation de ce modèle est similaire à celle des versions précédentes et nécessite tournevis et outils pour faire levier. Disponible en GSM et CDMA / 16, 64 ou 128 Go / Argent, Or, Gris sidéral ou Or rosé.

2690 questions Voir tout

iPhone 6S home button "sticking" after screen replacement

Hey All!

So I have a peculiar problem, been looking through the forum but I haven't found one like this. So I through another screen on my iPhone 6S- the Touch ID is functioning (thank God) but when I tighten the pentalope screws the home button "sticks" I can barely depress it. Everything else is great! But that is super annoying, if I loosen the screws I can press the button, but that's no good because they will eventually fall out.

Any ideas out there? Thanks!

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 1
Ajouter un commentaire

2 Réponses

Solution retenue

Bend the home button Metal plate away from the home button. E.g I think it's called concaved.

The middle part of the metal plate needs to be further away from the home button.

That should fix it as I have been doing it for 5 and 6 series.

Cette réponse est-elle utile ?

Indice 4

4 commentaires:

Thanks!- are we talking the plate that shield the button? Like the one that you screw over it?

par

Worked like a charge- genius!

par

Clarification for others:

The metal plate behind the homes button that is held by 3 screws.

par

It worked. Thank you Ben :)

par

Ajouter un commentaire

Thanks I can’t believe I never thought to bend the bracket to correspond with non oem parts

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

Trevor Mecaskey sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 3,706