Rep: 1
1
1
I disassembled MacBook following iFixit instructions. No obviously damaged parts. There's no light when charging, nor does on/off button have any effect. This was a big spill and several parts could be damaged. Should I give up or start replacing parts, beginning with logic board? This could become expensive quickly without the ability to test individual components...
Cette question est-elle utile ?
Rep: 116,3k
66
68
359
it first - use electrical contact cleaner, 99% iso-alcohol and let it dry 72 hrs.(I hope you let it dry well before you attempted to power up.)
Look for scorch marks and corrosion as you clean it with a soft brush and magnifying glass. Remember to clean/dry the back of the board. Depending upon where the liquid was spilled, and what sort of liquid it was you may get/be lucky.
Remember to return and mark accepted the answer that best solves your problem.
Good luck,
N
Cette réponse est-elle utile ?
A good beginning +
Dernières 24 heures : 1
7 derniers jours : 2
30 derniers jours : 3
Total : 2,032
