Aller au contenu principal

Le premier modèle d'iPhone, modèle A1203 avec 4 ou 8 Go de stockage, et coque en aluminum. Les réparations sont souvent basées sur le principe du levier et peuvent demander de la soudure quelques fois.

224 questions Voir tout

How to replace the glass only?

Has anyone tried this? Found a 25 dollar 1st gen in good condition on eBay and I would like to get it but it has a cracked glass. LCD is fine. Does it have LOCA? It is like the 3G/3GS screen?

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

Réponse la plus utile

Due to the design of the iPhone, the glass cannot be replaced seperately from the LCD panel. The glass and LCD are fused together during manufacturing and cannot be separated. Both the glass and LCD panel must be replaced as a unit.

Remplacement de l'écran de l'iPhone 1ère génération

Cette réponse est-elle utile ?

Indice 3

3 commentaires:

Could I remove the dock connector?

par

@mayer is correct. The average user can't replace the glass on it's own. This is not a DIY job.

It can be done with the right equipment, new glass, a UV light and LOCA glue but it's probably something you aren't capable of doing.

par

I have done LOCA replacements before, they were not perfect but they looked a lot better (a spec of dust got in the screen) Also, I just bought the phone.

par

Ajouter un commentaire

Ajouter une réponse

Gigabit87898 sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 60