Rep: 25
1
1
I dropped my JBL flip 3 speaker the other day and I started to hear a rattle inside so I decided to take it apart and see what it was and it was a small box at the top Corner of the motherboard labeled 1R5 and i don't know how to put it back on
Cette question est-elle utile ?
Rep: 784,2k
1,1k
894
2,3k
@mtz13 without actually seeing what is going on, it is difficult to answer. Consider posting some picture of your board with your question. Use this guide Ajout d'images à une question existante for that. The 1R5 sounds like a fixed 1.5uH inductor. Again without seeing it, this is only an assumption. Those are usually soldered to the board and there is not other way reattach it.
Cette réponse est-elle utile ?
Something similar happened to me. The 1R5 piece didn't break down fully and now one contact is lose. I think the only way is to solder it down. https://imgur.com/a/2y4Xy
Cette réponse est-elle utile ?
I had the same problem and solved it by cutting a wine cork in size to press the 1R5 piece against the contact. Good luck
Cette réponse est-elle utile ?
Dernières 24 heures : 0
7 derniers jours : 5
30 derniers jours : 8
Total : 1,491
Exact same problem has happened to me, does anyone have a solution
par XxMasked ManxX
the same excact thing happened to me
par I'm just Kidding