Aller au contenu principal

Office inkjet printer released in January of 2009. Model number G510n.

Questions au sujet de 40 Voir tout

Broken gear tooth in scanner

Hello, I noticed that whenever I turn on my printer, it makes this very loud banging sound. I managed to narrow it down to a broken tooth on the rack the scanner light goes across, as shown in the picture. Is there a way to replace it or get it repaired? Also, this isn't the wireless model, but there is no device listing for the plain one.

Block Image

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 solution

Réponse la plus utile

I'm not sure about replacing the part, but the answer in this thread (Which glue will work best to repair plastic dome lid locking part?) has tips on repairing plastic things. It's easier in this case as it's not food-related, so the options to glue it are much more abundant.

Cette réponse a-t-elle été utile ?

Indice 1

Commentaires:

Thanks for the reply! Not sure that that helps though since there isn't really anything left to glue back in place, it looks like the tooth just disintegrated over time or something, as it is the tooth that the light bar parks on.

par

I see. You could rebuild it with the liquid plastic welding stuff. Otherwise, you might try some Sugru: https://sugru.com/ or Sugru Moldable Rubber (3 Pack).

Though I'm not sure how well Sugru would do on such a small thing.

par

Ajouter un commentaire

Ajouter une réponse

da stumer sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 210