Why is my new Hard Drive not seen by Disk Utility?
I wish to replace the fully working 120GB HD with the upgrade 320GB WD3200BEVE drive to gain capacity.
When I fit the new blank HD, fresh from WD, and boot from a system DVD, the HD is not seen by System Profiler or Disk Utility.
I have used the same HD cable and this is the second drive with the same problem. If I refit the 120GB HD the machine works as normal.
I have checked for Firmware updates, there don't seem to be any for this machine.
Any advice please?
Cette question est-elle utile ?