Replaced power button sensor
I replaced m power button sensor and it clicks now but now my iPhone won't turn on. I tried to do a hard reset still not turning on
Cette question est-elle utile ?
Indice
0
454205
1 Réponse
Solution retenue
Rep: 121
3
Did you try turning it on with a power cable?
Other then that, try reconnecting the flex cable to the motherboard.
Cette réponse est-elle utile ?
Indice
0
5 commentaires
Yes i've tried with the power cable.
par Sandy
Try turning the iPhone on while the power button flex isn't connected to the motherboard. If it turns on, here's your problem.
par Andrea Hrelja
I fixed it. The problem was a little black rubber thingy that goes to the logic board was not where it should of been so put it in it's proper place put it together and booted right up.
par Sandy
That's weird, the rubber thing even if it's there or not it should not cause an issue.
par Ben
Yeah, I know I took it apart 3 times and ignored the black rubber but when I put it in the right place it booted right up.
par Sandy