Réparez vos affaires Communauté Boutique

La version Wi-Fi+ cellulaire de l'iPad Air d'Apple, numéro de modèle A1475. Disponible en gris sidéral ou argent, il emploie le processeur A7 personnalisé et est livré dans des configurations 16, 32, 64 et 128 Go.

125 questions Voir tout

Options

New glass lifting where the cables sit

Hi all. I have never had this problem with other models of iPad, but I keep having problems with the new digitiser lifting around the area where the cables sit. I have tried different things like poking the cables in just before closing that side, I’ve used small clamps to hold for 2 days and it still lifts! I’ve removed the pre installed adhesive and used strong Tesa tape instead.

I’ve tried new screens from different manufacturers and I still have the same results.

What can I be doing so wrong?!

Any tips would be appreciated.

Thanks

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

Try using B7000 liquid glue, you may have better luck with that.

Cette réponse est-elle utile ?

Oui Non
Indice 2

4 commentaires:

Thanks. Do you use that with the double sided adhesive, or remove that and use the glue instead of? Also, how does it affect removing the screen in the future should it need another repair?

par

With the adhesive, that glue is mallable so It's not like super glue it's fairly easy to remove if you don't use too much in a spot.

You can rub off the excess with your hands easily. Takes like an hour or more for it to set in.

par

Ok thanks I’ll give that a try. It’s a little strange to me though as surely you shouldn’t need glue?! I’ve ordered myself a tube of the glue so I’ll see how I get on

par

Ajouter un commentaire

Ajouter une réponse

Dominic Haywood sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 4

Total : 118