Réparez vos affaires Communauté Boutique

La version Wi-Fi+ cellulaire de l'iPad Air d'Apple, numéro de modèle A1475. Disponible en gris sidéral ou argent, il emploie le processeur A7 personnalisé et est livré dans des configurations 16, 32, 64 et 128 Go.

125 questions Voir tout

Options

USB device not recognised. Win 7 home premium.

I have an Ipad air LTE. was produced to me as DISABLED as they put the wrong password in too many times. The ipad charges through the port but is not recognised by windows so i can't do much to get into the device. Tried on several machines so it isn't computer related. Have not got another lead to try, but my ipad mini works fine connected to same computers, same lead. Any suggestions?

Sounds like an electronics repair job i *think*. Thoughts?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 1
5 commentaires

Have you installed iTunes? Have you tried different cables?

par

Yes i have, latest version and no i havn't. The mini works so it's not the cable

par

Cheers mate, yes it goes into recovery mode but as soon as it is plugged into the pc the USB message comes up saying it can't recognize the device, so that's where the world ends lol

par

@smythie17 Hello, does anything show up on iTunes when you plug it in?

par

no it does not

par

Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

Hi @smythie17 ,

Try forcing the iPad into the recovery mode and see if this works at all.

1. Turn off the iPad

2. Launch iTunes.

3. Plug the USB cable into the computer.

4. Press and hold the Home button down and plug the other end of the USB cable into the docking port.

Do not release the Home button until you see the picture of iTunes and plug

5. Release the Home button.

6. Hopefully iTunes has detected that the iPad is in the recovery mode.

7. Select Restore iPad

Cette réponse est-elle utile ?

Oui Non
Indice 2
Ajouter un commentaire

Options

Go into Device Manager

See if you have any devices with error messages

Remove these from Device Manager

then scan for hardware changes.

Cette réponse est-elle utile ?

Oui Non
Indice 0

1 commentaire:

Did that as well, just comes up with same error message when connected

par

Ajouter un commentaire

Ajouter une réponse

Gary sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 512