Réparez vos affaires Communauté Boutique

Sorti le 25 septembre 2015. Modèle A1688/A1633. La réparation de ce modèle est similaire à celle des versions précédentes et nécessite tournevis et outils pour faire levier. Disponible en GSM et CDMA / 16, 64 ou 128 Go / Argent, Or, Gris sidéral ou Or rosé.

2690 questions Voir tout

Options

iPhone 6s Black Screen After Screen Replacement

I recently got an iPhone 6s with a pretty badly damaged screen. The screen worked, however it was completely cracked and there was a black bleed mark on the LCD. I ordered a screen and began replacing it.

After replacing the screen and hooking everything back up to the logic board I got a black screen. I absolutely made sure to disconnect the battery before ever touching any other part of the phone. I have also tried connecting it to iTunes and got as far as it asking for the passcode which I cannot enter as the screen does not work.

Now here's where it gets hairy and I'm stuck, after looking through the various other similar questions I attempted to test if thew screen was bad by replacing the severely cracked screen, which I knew worked. After taking all the assembly parts off the new screen and putting them back on and trying to plug it in, I got nothing.

It's still being recognized by iTunes, but now no matter which screen I have plugged in I get a black screen. I have a sinking feeling it's going to require board level repair (which I can't do, yet) but I'm hoping maybe someone here can see something I can't.

If there's something you think may help me get this problem remedied or you need more information on what all I did to it, just ask and I'll happily provide more info. Thanks everyone.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s

Options

if you did not disconnect the battery you may have damaged the back light circuit -this will require microsoldering repair to replace the filter-

Cette réponse est-elle utile ?

Oui Non
Indice 0

4 commentaires:

I did disconnect the battery. Do you think maybe it could be anything else?

par

Only other thing I can think of is long screw damage under the two screw holes under screen connectors, but I don't think that would cause that specific issue like that.

par

Ok. I guess I'll have to send it in to someone that does board level repair to find out. Thanks.

par

let me know how it goes.

par

Ajouter un commentaire

Options

Backlight filter Gone, this happens once in a blue due to static or mis connection (both 6s 6sp remains with power in the last 3 pins of the connector 3.8v, if battery stay connected and even its off) . use an anti-static wrist band wen doing 6s 6sp.

Cette réponse est-elle utile ?

Oui Non
Indice 0

2 commentaires:

It's definitely possible. I always make sure to use both a anti-static mat and wrist band when doing repairs. Thanks for the input. I'll get it checked out. Any microsoldering company recommendations?

par

Microsoldering.com, iPad rehab

par

Ajouter un commentaire

Ajouter une réponse

Repair-IT sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,403