Réparez vos affaires Communauté Boutique

Sorti le 19 septembre 2014, cet iPhone avec un écran de 4,7 pouces est une version plus petite de l'iPhone 6 Plus. Identifiables par les numéros de modèle A1549, A1586, et A1589.

4994 questions Voir tout

Options

Touch is not working. Missing a voltage?

Hello all,

More of a technical question... I have an iPhone 6 with no touch. Before lifting cumulus I was poking around for voltages and am missing PP5V1_GRAPE_VDDH. There is no short to ground on that line.

I pulled U1501 and replaced it with one I had on a doaner board that might have been bad. I lost all image on the screen but had backlight after that.

Retracing my steps, I reballed the original U1501 an stuck it back on and the phone is back to how it was.

Should I order and install a new U1501 or is there something else you would advise me to check first?

Thanks all and happy repairing!

Joseph

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

did you try meson to see if it could be an issue

Cette réponse est-elle utile ?

Oui Non
Indice 2

28 commentaires:

Honestly no I have not. Before pulling it off I thought I would check voltages going to the two.

If it were an ip6+ they for sure first thing would be an M1 jumper. But in this case, no stress on the board seems to make any difference in it working, so I was leaning away from classic touch diseases (also being a 6 not a 6 plus) are there some inputs I should test out for menson? Or what would you recommend I do to it?

par

cumulus and meson have connected lines like CUMULUS_TO_MESON_VSTM_OUT_N, CUMULUS_TO_MESON_VSTM_OUT_P, CUMULUS_TO_SAGE_BOOST_CLK_EN, TOUCH_I2C_SCL, TOUCH_I2C_SDA

par

also did you check resistance on j2401

par

I didn't check resistances on j2401, somehow that passed my mind .... Surprised. That could easily tell me what it might be.

Is it normal for U1501 to have 2 of the 3 power outputs OK and the third dead? That's my primary thought on this one at the moment. I don't have the schematics here with me at home, butbinkimda thought that they would all be present, or none.

par

I will definitely check those lines though on Monday

par

Voir 23 commentaires en plus

Ajouter un commentaire

Ajouter une réponse

Joseph Hughes sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 6

30 derniers jours : 9

Total : 573