Réparez vos affaires Communauté Boutique

La version cellulaire de l'iPad Air deuxième génération d'Apple. Modèle A1567.

86 questions Voir tout

Options

iPad sensitivity issues after new screen

After replacing the LCD/digitizer on my iPad Air 2, the touch sensitivity has been really off. While I’m typing, I’ll press any key once and it’ll enter it 1-5 times. While I’m scrolling through websites, it won’t always recognize the speed I’m scrolling and will “click” on random links I’m trying to scroll over.

Note: I don’t have the glass and iPad adhered back together yet. I have all the ribbons and shields in place but the adhesive is still covered. Also, I had to do a DFU mode restore because of the damage done to the screen before the replacement, see Can a new LCD and digitizer fix this?

Any help/advice will be appreciated!

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

Either it's a defective screen, the ribbon cables were folded / squished or

(This one is probably not the issue as it's not seated on the iPad yet) that the screen is sit on iPad housing that has dented corners / bent frame stopping it from sitting flush

Cette réponse est-elle utile ?

Oui Non
Indice 2

3 commentaires:

If it’s not completely flat, would it cause this issue?

par

Yes, too much flexing on the glass itself will cause the touch to not work properly and you end up getting the ghost touching effect.

par

Good to know. I’m thinking I’m gonna go through with a return though. It’s been laying flat and doesn’t take long before it acts too sensitive or not sensitive enough

par

Ajouter un commentaire

Ajouter une réponse

Mike sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 7

Total : 428