Rep: 115
6
7
1
Hello!
I have a customer with a Playstation 3 Super Slim CECH-4303C. The laser lens is faulty and i would like to replace it. I have been searching google, ebay, amazon, aliexpress and more for a compatible part or just a brand new disc drive, but i can't seem to find it anywhere.
Does anyone know where i could possibly get it or why it's not on the market?
Cette question est-elle utile ?
Rep: 782,4k
1,1k
893
2,3k
@captaintech the laser lens for a Playstation 3 Super Slim CECH-4303C is actually a KES-850A/KEM-850A or a KES-451A/KEM-451AAA but not a KES400A
Going by your board number it is a KES-451A/KEM-451AAA and something like this will work for your PS3
KES- is the laser, KEM- is the drive deck and they have to match. Here is the guide for the repair Remplacement de la lentille du laser du PlayStation 3 Super Slim
Cette réponse est-elle utile ?
Thank you very much! :)
Got the new part and it worked perfectly. Thank you again! :)
Seems the drive assemblies are common for the CECH-40xx CECH-42xx CECH-43xx AND there are 2 drive models KES-850A/KEM-850A dual lens or a KES-451A/KEM-451AAA that I have seen in dual and single lens as the OP posted pictures for. Or are pictures of a dual lens KES-451A/KEM-451AAA incorrect?
Can anyone confirm this?
Cette réponse est-elle utile ?
Rep: 4,1k
3
2
You won't find a replacement laser assembly, but you should be able to replace the drive. There should be some numbers on the drive itself. Look at the PC board for some numbers. Post here any of the numbers that you find and I'll indicate the number of the drive.
Cette réponse est-elle utile ?
Hello. Thank you guys for your reply and sorry for my very late reply. I took some pictures of all the numbers i could find. Hope you guys can help me based on that. Thanks in advance!
The numbers on the laser assembly and the PC board will identify the specific parts, but not the assembly which is not sold separately. If you can find one on Ebay, the numbers on the PC board need to match what you have.
Your only option at this point is to replace the drive.
Meaning the whole thing in the pictures right?
My error. I was thinking of the PS4. There are replacement laser assemblies for the PS3. Look for KES-400A. This is the part number for the laser. I would recommend that you get the entire assembly and not just the laser. What you have pictured in the bottom photo is the laser, the spindle motor and drive motors on a chassis. This is held in place by 4 screws through the rubber vibration isolation grommets. Expect to pay around $20 for the assembly.
Dan
Dernières 24 heures : 1
7 derniers jours : 2
30 derniers jours : 17
Total : 1,866
1 commentaire
Hi @captaintech
Suggest you to open up and check for the part number of the Lens,
Hopefully from there you can find a replacement.
par Augustine