RÉSOLU : Replacement Screen goes blank when waken from idle/timeout. - iPhone 6s

Replacement Screen goes blank when waken from idle/timeout.

I wonder if anybody can give me a pointer as to what is going wrong my replacement screen for an iphone 6s, when I installed the screen i can get it only to work when the screen is popped out and has no pressure on a certain area of the screen.Once the screen is placed into the frame it works up until the screen goes idle, when its idle I try to wake it up but only the backlight works. I can pop the screen out of the frame it will start working again and once it is out I can put the phone in idle and wake it up without a problem.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non

Indice 1

1 commentaire

I have a similar situation

24 févr. 2019 par xkldnamhai.com

Publié: 14 févr. 2019

Options

You probably have a mix of a bad quality screen and a bumped housing there and the combination of the two causes that issue. First thing to do would be to try to straighten the housing shape where it’s bumped with a small precision hammer. Or find an original used housing on the market. You could also try reducing a bit the side pressure by gently use very fine sand paper on the screen edges to reduce a bit thickness.

Cette réponse est-elle utile ?

Oui Non

Indice 4

5 commentaires:

I second this the housing is probably bumped/bent. Which causes pressure on the screen.

14 févr. 2019 par Lars

The EMI shield pushing against the housing was also causing side pressure. Thanks you very much.

14 févr. 2019 par Robert Ryan

It's usually just a bad screen. I've used lots of screens on slightly bent frames.

14 févr. 2019 par Ben

Thank you all, I replaced the screen and it solved the problem.

24 févr. 2019 par Robert Ryan