Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Version revisitée de l'iPhone 3G avec une vitesse de traitement plus élevée. La réparation de ce modèle est similaire à celle du 3G et nécessite de simples tournevis et outils pour faire levier. Modèle A1303 / capacité de 16 ou 32 Go / coque en plastique noir ou blanc.

Questions au sujet de 1972 Voir tout

power button - problem with button after fixing

Hi,

I have 3GS, in order to use the power button, u need to press really hard, in some point, and then it works (With pinching as well).

Volume buttons, headset, silent switch are working.

I opened the device, cleaned the button and the flex, made sure the button is in 180 to the back panel - but it didn't work.

what could resolve this?

thanks

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 solution

Réponse la plus utile

Simple fix. This issue is not the button itself, it will be the flex beneath it that is the issue.Try to find some rubber of some sort that wont degrade. When i have come across this issue i use the rubber from HTC home buttons. Cut a very small piece out (approximately the size of the home button flex (pictured below)

Block Image

Use some fast drying glue/super glue and glue it inside the small circle. Make sure you are carful as you only have one shot at this as super glue dries very quickly. But don't worry too much if you break it as it is already possibly broken. Put the rubber in place and wait minimum 5 minutes for it to dry. Replace ribbon and home button and hope for the best! If it still does not work you can either buy a new Headphone jack assembly and install (make sure you know what you are doing before carrying out this type of part replacement as it is rather difficult) or you can buy a new back assembly and it will be pre-installed for you.

Headphone jack assembly -

iPhone 3G/3GS Headphone Jack Assembly

Back assembly -

http://www.macfixit.com.au/shop/index.ph...

Image iPhone 3G/3GS Headphone Jack Assembly

Produit

iPhone 3G/3GS Headphone Jack Assembly

$14.99

Cette réponse a-t-elle été utile ?

Indice 1

Commentaires:

Hey martin,

Well.. The HTC tip is not possible cause I don't have it, plus I am not sure I understood.

But I would like to ask something else about the Headphone Jack Assembly:

Replacing this part to a new one, should I be carefull with something?

I understood that the Vibrate area has the mute button and some other parts that must be there and you must work very carefully there.

Thanks

par

Yes, below is a link to another post that has had a similar issue and i explain the issues with the ribbon in further detail. If i were you i'd just buy a new back assembly and be done with it. A lot easier and a lot less time consuming! Trick to getting the mute switch to stay in mute button?

par

Ajouter un commentaire

Ajouter une réponse

Shai sera éternellement reconnaissant.
Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,627