Accessories not gripped tightly
After tightening an accessory into place with the collett nut, it doesn’t grip enough, so tool such a saw just stops when pressed against object.
Cette question est-elle utile ?
Indice
0
582177
1 Réponse
Réponse la plus utile
Rep: 8,3k
24
12
8
Measure the shaft on the tool in question. It is probably 3/32” and you probably have a 1/8” collet installed in the collet nut. If you have lost that part or did not get it with the tool they are readily available on line.
Cette réponse est-elle utile ?
Indice
2
