Aller au contenu principal

Processeur quad-core Intel Core i7 à 2,2 GHz (Turbo Boost jusqu'à 3,4 GHz) ou 2,5 GHz (Turbo Boost jusqu'à 3,7 GHz) avec 6 Mo de cache L3 partagé.

467 questions Voir tout

Blown capacitor on logic board. What is it?

Long story short, my logic board went out. Started smelling like burnt electronics. Pulled the board out, and found one of the capacitors on the back side of the logic board was melted.

It seems like it would be fairly easy to replace, I just don’t know what capacitor it is, or where to find one. I know it looks like a D2E Case Tantalum capacitor, but beyond that, I’m not sure.

Thanks in advance!

Block Image

Block Image

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 1
Ajouter un commentaire

2 Réponses

Solution retenue

The Cap is one of a group: C7370 which is a 68UF 20% 16V Poly-Tantalum in a D2E case

Here’s one source: Mouser

Cette réponse est-elle utile ?

Indice 1

5 commentaires:

Thanks a ton! I do have a follow-up question. (see second picture above) The blown capacitor is opposite the metal block (R36 446 RA7). I don't know exactly what that component is. Can't tell if they're connected or not.

Just wondering if there's anywhere I should check for a short or anything before replacing the capacitor?

Thanks again!

par

Also, the link seems to point to the wrong thing? It pulls up a 6.3V 220UF B case capacitor?

par

The R36 is an inductor coil Shielded Power Inductors

par

Thanks for the clarification!

par

Ajouter un commentaire

Found this question/answer that led me to the right replacement capacitor

Cannot find Tantalum - Polymer Capacitors that match

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

Brad P sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 8

30 derniers jours : 19

Total : 604