Réparez vos affaires Communauté Boutique

Guides pour la version Wi-Fi de l'iPad Mini 2. Annoncé le 22 octobre et lancé le 12 novembre 2013. L'iPad mini 2, également connu sous le nom de mini iPad avec écran Retina, a tous les pixels de l'iPad Air dans un plus petit 7.9 " format.

220 questions Voir tout

Options

Parts of screen unresponsive after repair

I smashed the screen of my iPad Mini 2 a few years ago, the damage was minor but I chose to get it repaired professionally. The screen works for the most part but certain areas such as the top right hand corner and individual keys on the onscreen keyboard on landscape mode are unresponsive.

I have not damaged the replacement screen in any way, so what could be causing this issue considering most of the screen works perfectly. It’s frustrating because the device still works pretty well given it is almost 7 years old, but it is annoying having to turn the iPad around to use certain functions.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

@boymetworld91 this “it is annoying having to turn the iPad around to use certain functions. “ is a clear indication that the issue is your digitizer. It is really not uncommon to get some that are damaged even prior to installing. Replace the digitizer once more then re-evaluate.

Cette réponse est-elle utile ?

Oui Non
Indice 3

3 commentaires:

What is a regular cost to do this, the iPad is 7 years old and having replaced it once I don't want to spend big bucks again if investing in a new iPad would make more sense.

par

@boymetworld91 you can get the digitizer for the iPad Mini 2 for around $20 USD Use this guide for the repair Remplacement du panneau frontal complet de l'iPad mini 2 Wi-Fi

par

Before trying another digitizer there are two things to check.

Inspect the screen connector for the digitizer on the logic board. The pins in that connector can come off quite easily when unplugging it.

The way to avoid pins popping off is to pull disconnect from the corner of the connector only with a nail.

If there is indeed a missing pin it'll need to be replaced by someone that does microsoldering.

Also just in case if there is no yellow tape at the bottom border of the digitizer behind make sure to apply that to avoid any EMI interference with the home button cable and housing of the iPad.

par

Ajouter un commentaire

Ajouter une réponse

Dan sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 4

Total : 49