Réparez vos affaires Communauté Boutique

Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

549 questions Voir tout

Options

iMac 20" A1224 dark screen with 9 beeps

I have gone through the previous messages about this issue:

3 short + 3 longer + 3 short beeps means EFI ROM checksum failed. I downloaded and created Firmware restoration CD 1.6 for iMac7,1 from Apple support.

Turned power on and iMac sucked in the CD and ejected after 1 minute and started beeping cycles again.

Questions:

  1. I burned the CD on Windows with PowerISO. Should I try burn the CD on Mac instead?
  2. It seem doing something with the CD. Or it's hardware issues with the ROM or board that firmware refresh won't fix?

Any feedback welcome. Thanks.

ps. I remove the screen and couldn’t see any bad connection and also replaced the lithium battery too.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 1
4 commentaires

I have the same problem and I was unable to find the 1.6 Restoration CD (link @apple gives not available error).

Please where did you find the iso?

par

Hi! I have the same problem. I try to find Restoration CD 1.6, but on an Apple's website, the link is dead. Dropped the entire internet in search of a disc! I've been looking for three weeks! Maybe you still have an image of this disk?


par

Do you have the link for the firmware restore cd 1.6 the Apple site link is dead I also have this issue. I have access to another Mac to burn the image to cd

par

You'll need to contact Apple Support to get it.

Point to the Firmware Restoration CD 1.6 page so they can see someone messed up the file access.

par

Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

Ok thanks I’ve managed to fix it. I stripped the machine down this morning. It would appear the CMOS battery was loose. The plastic that holds it in place has failed so replaced it with a new battery and used good old hot melt glue to hold the battery in place. Switched her on and heard the lovely Mac chime again. Put her all back together she’s working a charm. Thanks for your suggestions.

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire
Réponse la plus utile

Options

Sounds like the iMac didn’t like the created CD. That could be because making it on a windows system Vs Mac. It’s also possible the format of the CD was not correct.

Can you make a fresh one on another mac system?

Cette réponse est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire

Ajouter une réponse

Sunyao sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 532