Aller au contenu principal

A2115 / 2019 / Processeurs à partir de 3,0 GHz 6 cœurs i5, jusqu'à 3,6 GHz 8 cœurs i9. Commercialisé le 19 mars 2019.

131 questions Voir tout

iMac fan and CPU maxed with Kernel job after screen replacement

Hello, I recently replaced my iMac’s screen after the last one had a nasty crack on it. After I got everything together, I fired up the machine and during the POST, the fan started up at full speed, the machine loaded but the CPU was so taxed, everything slowed to a crawl. Upon further inspection, I realized that I neglected to install the monitor temp sensor. I pulled the old sensor off the old screen, installed it in the new one, and fired up the machine again, no affect. Beyond the HD sensor and the Monitor, i’m not aware of any other removable sensors. Not sure what i’m missing. Any advice is more than welcome.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

Réponse la plus utile

Review Step 25 & 26 Remplacement de l'écran de l'iMac Intel 27" Retina 5K 2019 I’m suspecting you forgot to transfer the sensor or connect it.

You may want to install this app TG Pro getting the full version will give you deeper details which could also help you figure out and locate what’s going wrong.

Cette réponse est-elle utile ?

Indice 1

4 commentaires:

Unfortunately, I figured this out early on. I pulled that sensor off my old screen and installed it on the new one. thank you though.

par

@Aboodness - So you are working correctly now?

If that was it don't forget to accept the answer - Thanks!

par

I went ahead and purchased a new sensor for the screen, this ended up fixing it. Thank you.

par

@Aboodness - Great news! Don't forget to accept the answer - Thanks!

par

Ajouter un commentaire

Ajouter une réponse

Aboodness sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 58