Rep: 11
2
My radio was torn out along with the plug that powered the radio/sent data to speakers. Now I have no idea which wires to to where so I can reinsert them into their proper ports.
Vehicle specific: Toyota Sequoia 2003 AWD SR5
Cette question est-elle utile ?
Rep: 449,1k
11
366
1,4k
Hi,
Here’s a link to the Toyota Sequoia 2001-2007 Service Repair Manual + Owner’s Manual that may help.
Scroll down and click on the Diagnostics link.
When the file opens, scroll down to p.2163 (page numbers are at the bottom of each page - also shown as DI-1969 at the top of the page - if you type1977 in the box to the left of 2393 in the header bar and press the Enter key, you will come close to the page.)
This page and the following page give all the wire colours and their functions for the radio receiver assembly (separate type amplifier)
On p.2165 (DI-1971) is the wiring for the radio receiver assembly (built-in type amplifier).
This section of the manual also shows how to do the diagnostics for the radio etc
Hopefully this is of some help.
Cette réponse est-elle utile ?
Dernières 24 heures : 3
7 derniers jours : 23
30 derniers jours : 129
Total : 2,772
