Rep: 13
1
My TV will not turn on and there is no standby red light either. After switching off power at the socket on and off a few times the TV will randomly turn on and I see the red standby light. Once running there seems to be no issues. However if I turn off the TV it almost always has issues turning on again until I power on/off a few times.
Any ideas? A faulty power board?
Cette question est-elle utile ?
Rep: 449,1k
11
366
1,4k
Hi @frnw ,
Have you checked if the power outlet is OK? It may be a faulty switch in the outlet. Try connecting to another outlet. Also if the TV is connected via a powerboard (powerstrip?) connect it directly to the wall outlet if you have proved that the wall outlet is OK
The power board sends a voltage signal to the mainboard when there is power connected to the power board and it is the mainboard that turns on the Standby power light if the signal is the correct value.
If the power outlet is OK you would need to check the standby voltage on the power board first to determine where the problem is.
Cette réponse est-elle utile ?
@jayeff Thanks for that. The wall outlet is ok (tested on different wall outlet with same problem) and TV has been directly connected.
I'm going to buy a multimeter to help troubleshoot so presumably any digital multimeter from amazon or the like will do the job?
Yes most DMM will do as the Standby voltage is usually less than 10V DC.
However, BE SAFETY AWARE as there is EXPOSED LETHAL AC VOLTAGE on the power board near to where you will be testing for the standby voltage so be careful where you place your fingers (hands etc) and also the meter test probes.
Also buy a DMM which comes with a user manual (or one that can be downloaded) and read it first and become familiar with it if you don't know how to use one, before starting any testing.
Good luck
Thanks. I'll order one and see how I go. Thanks for the safety advice. I'll be cautious. Appreciated!!
Dernières 24 heures : 0
7 derniers jours : 0
30 derniers jours : 2
Total : 96
