Rep: 1
1
I have tried multiple things including a suction cup, some old credit cards, my fingernails, and a stiff plastic straw, I ordered some actual pry tools to see, but I feel like I will still have issues, I have gotten a good amount of clips off but it is not a big enough gap the grab the button cover from the the trackpad area and pull forward
Cette question est-elle utile ?
Rep: 479,6k
35
329
971
The trick is to slide the bottom cover to the front and then lift.
I sometimes find junk has gotten into the grove area which stops it from sliding forward. I do two things I use strong duct tape to create a handle to pull forward on the front half of the cover and leave space in the center for a good suction cup to pull up and a second set of hands to hold the system. Then dripping some isopropyl alcohol along the left and right side gaps to help break the seal.
13” model
Cette réponse est-elle utile ?
So it seems for me what is stuck is the slide in tabs, I am unsure how to get them dislodged, I also noted that the model shown in the picture is a 16 inch, however I am almost 90% sure the 13 inch has the clips as well
@gamerchapet - It's the same setup! Look at the added image
@danj Ah so looking at that all I have it the two "Drop in Tabs" the rest is dislodged, but I have no idea how to get the drop in tabs to let go, so I can move the back cover off
@gamerchapet - Slide and lift and slide a bit more. The middle drop in tabs need the lift.
I manage to get it removed, now I am stuck on the part of putting it back, I am pretty sure it's just a matter of lining it up, just taking forever to line up. (Why did they move to this from the 2015 drop in design) *sigh
Dernières 24 heures : 2
7 derniers jours : 21
30 derniers jours : 133
Total : 527
