Réparez vos affaires Communauté Boutique

{A1989 / EMC3214} — Sorti en juillet 2018, le MacBook Pro 13" contient des processeurs quad-core i5 et i7 et une carte graphique intégrée Intel Iris Plus.

203 questions Voir tout

Options

A1989 Board swap possibility and requirements

Hi there!

I have two a1989 MacBook Pros, one of which has an issue in the logic board and does not transmit video to the internal display.

I wanted to swap out the boards in these two machines, as the functional one has an US layout topcase (dinged in places), while the one with no video has PT layout and in much better condition.

I’ve been reading that the T2 chip may brick the MacBook Pro, and wanted to confirm prior to dismantling the Macs… they are both fully original and with no aftermarket parts, so will it work?

If yes, will I have to swap the fingerprint sensor between cases too?

Thanks in advance for the advice.

Cheers,

Pedro

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

Brick the machine? I doubt it. I have done a similar thing before just to test some components on a MacBookAir 2020 (Intel) without issue. But you will likely lose some functionality. Things like True Tone display may not work properly and I’m not sure about Touch Bar functionality, but T2 regulates those functions and both display and top case are paired to the logic board. The Touch ID sensor is also paired, so if you do not transplant it with the logic board it will only function for power and not fingerprint sensing. But board itself should function just fine.

Cette réponse est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire

Options

Yes, you can swap out your logic board, but are you sure the issue is the logic board and not the display?

Assuming the display is working, they you would need to swap out the TouchID button with the logic board as the two are married and can’t be separated.

As to True Tone issues @flannelist pointed out, that’s not true here. As the display is a part thats been calibrated vs a fresh part that has not, so it should be OK here.

Often I find the small circuit board (T-CON) which is part of the display assembly get damaged. Unless you’ve got a cracked display this is the likely cause of your lack of a working display. To prove that plug in an external display if that is working then the display is bad.

I would be doubly sure before proceeding as you may end up with still a busted system in the end.

Cette réponse est-elle utile ?

Oui Non
Indice 1

2 commentaires:

AH! That makes sense Re: True Tone. As I work for a small AASP, I get mostly vague "It won't work right" information and don't get much of an opportunity to play around with swapping parts since don't have ton sitting around. So that is excellent information.

par

Thank you for input, Dan!

Unfortunately, the issue is with the board itself... I've tried changing displays and I still don't get video. It was diagnosed as an issue with the EDP_INT_AUX_N data line which regulates the backlight... it's close to a 50V power rail connected to the CPU, and apparently the two lines were merged, rendering the internal display useless. This board can only be used as a desktop with an external display.

Regarding the possibility of the swap, according to what you mention there should be no problem whatsoever, as all parts are original and already calibrated... I think I'll give it a try!

par

Ajouter un commentaire

Ajouter une réponse

Pedro Coelho sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 4

Total : 197