Rep: 13
1
When I open the camera app, I get a brief picture then it freezes and says "Warning : Camera failed" I've already replaced both the front facing camera and the rear camera module, but have the same results. I didn't see any damaged pins/connections when I took everything apart, could it be a damaged motherboard?
Cette question est-elle utile ?
Rep: 34,7k
10
22
44
more than like an issue with the motherboard
Cette réponse est-elle utile ?
Rep: 783,8k
1,1k
894
2,3k
@mr_shade it is possible that this is a PCB issue but there are no direct connections between components. You could check the individual components and see what that shows you.
I would also suggest to reinstall the firmware to make sure that this is not Software related. This should help located the components etc. SM G988B Schematic
Cette réponse est-elle utile ?
Thanks for the schematic! I will take a closer look at the motherboard when I get a chance.
Dernières 24 heures : 0
7 derniers jours : 3
30 derniers jours : 12
Total : 154
