Aller au contenu principal

Repair information for Samsung clothes dryers.

16 questions Voir tout

have replaced the heating element. it’s giving the same error code (HE

I have a Samsung Electric dryer (DV42H5200) and have replaced the heating element. Dried a load of clothes just fine after replacement.

Now a week later (laundry day) it’s giving the same error code (HE). Well, that was until I attempted to temporarily bypass the thermistor. Now it’s giving the code for the thermistor (TE) and immediately shuts off after running a few seconds.

Is there a way to bypass this thing other than making a loop from one pin to another?

I ohm tested the thermistor and it came out to 6.5k and went down as I put my finger on it. I understand it should be around 10k.

Is this what my problem really is?

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

Réponse la plus utile

Hi @itsbrokeagain

According to p.35 of the service manual the thermistor should test 10K Ohms @ 25°C/77°F.

It also details the resistance of the 3 thermostats as well.

Hopefully this is of some help.

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire

Ajouter une réponse

Itsbrokeagain sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 7

Total : 100