Aller au contenu principal

Commercialisé en novembre 2020, ce MacBook Pro 13" dispose du système sur une puce (SoC) Arm Apple avec un processeur octa-core et une carte graphique octa-core. (Modèle A2338 / EMC 3578 avec deux ports Thunderbolt 3)

111 questions Voir tout

Service Recommended: MacBook Pro m1

Hello! I just changed the battery of my macbook pro m1 and I get that error. I have restored the MacBook and nothing. The battery seems to work since without the power cable it works fine, however I can't see the percentage and I get that error. Can somebody help me?

Block Image

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 1

1 commentaire:

Where did you get the battery? Also are you sure you needed to replace it? This is a young system which shouldn’t need a new battery yet.

par

Ajouter un commentaire

1 Réponse

When you go to System Settings -> Battery, what do you see? Can you see the percentage there? If so, you should let the battery charge to around 100%, then let it discharge to around 10% or so, then reconnect the charger and let it charge up again to 100% to see if the message goes away after putting the battery through a full charge cycle. You could also try booting into Safe Mode to see if this fixes the issue. In the worst case scenario, there may be a defect with the battery you installed. Good luck!

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

Borja 1 sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 82