Réparez vos affaires Communauté Boutique

Tutoriels de réparation et informations de démontage pour le MacBook Pro 16" commercialisé en novembre 2019. Modèle A2141, EMC 3347.

211 questions Voir tout

Options

Changed the battery but not charging/turning on

My battery was staying at 1% even while charging and system preferences advised a new battery. I changed the battery, but now the computer will not turn on even if I disconnect the battery. I followed all the steps and used esd safe tools and I was esd anchored. Any suggestions about how I can possibly fix? I have tried a SMC reset but the best result I got was the touch bar flashes red once on two occasions. I have not been able to get it to replicate again.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

Make sure that you are connecting a known good 140W USB C charger when you attempt to power it on. Anything less than 140W may be unable to power on the computer or charge the battery from a fully discharged state. If you are using the correct wattage charger, the it may be possible you have a larger hardware issue with your computer, possibly a damaged logic board, in which case you'll need to do more advanced hardware troubleshooting. Good luck!

Cette réponse est-elle utile ?

Oui Non
Indice 1

2 commentaires:

I thought the macbook pro 2019 16" used a 95w charger? That's the one I found that was recommended when I looked it up.

par

@davidhockaday You're right - it looks like this model requires the 96W charger. Confirmed by looking at the tech specs under the section for power. https://support.apple.com/kb/SP809?local...

par

Ajouter un commentaire

Ajouter une réponse

David Hockaday sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 5

Total : 64