Réparez vos affaires Communauté Boutique

Mis sur le marché en juillet 2018, le MacBook Pro 15", modèle A1990, est muni d'un écran de 15,4 pouces avec rétroéclairage LED et technologie True Tone et d'un processeur 6-core i7.

208 questions Voir tout

Options

Battery charges in sleep/off mode only

Block Image

Block Image

I am experiencing an unusual problem with my 15" MacBook Pro, mid-2018 model. It only charges when it is in sleep or turned off, but fails to charge when it is in use. I have been utilizing the original charger and cable provided with the device. Although the battery has been replaced with a high-quality one, with a cycle count of approximately 16, its performance is satisfactory. I am curious to know what might be causing this issue. I have already attempted an SMC/PRAM reset.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s

Options

Have you try using the different ports? Try the other three.

Clearly you have a power switching logic issue. If your lucky it’s only one ports power controller. If not the TPS51980A power controller which the ports power passes through to the logic board.

Cette réponse est-elle utile ?

Oui Non
Indice 0

6 commentaires:

I have indeed tested all the ports, and I've noticed that occasionally the battery starts charging when using the same charger or port, while at other times it does not.

I have yet to do a clean instal of the OS.

par

@beebah - I would take the ports out so you can clean the or if needed replace them.

Refreshing the OS likely won’t change anything. Every time I’ve had to deal with charging issues it’s either a dirty port or the switch logic is messed up on the logic board.

par

Ports are already clean as they work fine for data transfer. I can hear the charging chim once the charger connected. But the battery icon says "battery is not charging".

par

@beebah - The data lines and power lines are independent, so it’s possible the data lines are working, unlike the power. There are multiple lines so you might have a few not working.

I would start there, then it’s the power switching logic.

par

Gotach. Is there any other things which I should test before going for logic board inspection?

par

Afficher 1 commentaire en plus

Ajouter un commentaire

Ajouter une réponse

Beebah sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 58