Fans blaring and Black screen After upgrading HDD

Question

iMac Intel 27" Retina 5K 2019

A2115 / 2019 / Processeurs à partir de 3,0 GHz 6 cœurs i5, jusqu'à 3,6 GHz 8 cœurs i9. Commercialisé le 19 mars 2019.

131 questions Voir tout

ChrisM @chrism56542

Rep: 1

Publié: 21 sept. 2023

Options

Fans blaring and Black screen After upgrading HDD

Hello, I just upgraded my internal Micro Blade SSD with a 2TB OWC Acura Pro SSD. I also added an internal HDD, and upgraded the RAM. Once I had everything put back together and sealed up the computer won’t boot past a black screen. You can hear the chime but nothing but a totally black screen. Also the fans come on full speed. I installed the HDD thermal sensor that OWC provided with the hard drive. Any ideas what might be the problem?? Please advise

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non

Indice 0

Ajouter un commentaire

1 Réponse

Dan @danj Rep: 479,6k Self employed contract worker 35 329 971 · Answer 1 · 2023-09-22T03:50:52-07:00

Dan @danj

Rep: 479,6k

Self employed contract worker

35

329

971

Publié: 22 sept. 2023

Options

Well with so much change without cross checking after each change makes diagnosing the problem very hard.

You’ll need to undo some of the changes you did. I would start off reverting the RAM as it’s the easiest. Take our the new RAM and put back the original RAM. Next put back the original drive.

Put it’s also possible you damaged the display or it’s cables! If this was the first time working on a Mac and didn’t follow our guide and use the correct tool it’s not uncommon. This could be an expensive repair!

Remplacement de l'écran de l'iMac Intel 27" Retina 5K 2019

Until you know the system is working hold off remounting the display and make sure you use the correct tapes!

Changement bandes adhésives iMac Intel 27" Retina 5K 2019