Aller au contenu principal

Lancé le 4 novembre 2017. Modèles A1868, A 1901. Disponible avec GSM ou CDMA /  64 ou 256 Go / argent et gris sidéral. (Se prononce "iPhone 10".)

1199 questions Voir tout

Bootloop after battery replacement

Hello, I recently replaced my battery and after doing so my phone became stuck in a bootloop. I tried restoring via iTunes but it gave error code 9. I looked at other posts on this forum and assume I broke a resistor I would like to try resoldering it but I can't find the damage. It also keeps popping out and another flex cable for my atenna (I think) also keeps popping out. Pictures added below.

Battery:

Block Image

Block Image

Block Image

Wifi/BT:

Block Image

Block Image

Any help would be much appreciated.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

2 Réponses

Hello, could try to disconnect your earspeaker flex cable and try reboot the phone? It is very common and easy to damage the proximity sensor that is on that and cause boot loop.

Cette réponse est-elle utile ?

Indice 0

1 commentaire:

Hi, unfortunately that isn't the problem the cable from my earspeaker isn't connected since I replaced the screen but didn't put over the speaker yet.

Thanks for your reply

par

Ajouter un commentaire

I had a similar issue after a battery replacement once. The bootloop can be frustrating. In my case, it turned out to be a loose connection inside. I had to double-check all the cables and make sure they were securely attached. Also, try cleaning the connectors with some isopropyl alcohol if you can.

Cette réponse est-elle utile ?

Indice 0

1 commentaire:

Do you remember where the loose connection was? Battery flex? I will try alcohol asap. Thank you for your help.

par

Ajouter un commentaire

Ajouter une réponse

Bermt sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 8

Total : 52