Réparez vos affaires Communauté Boutique

645 questions Voir tout

Options

My speakers and headphone jack do not work/no output device?

I recently did a rebuild due to water damage on a 2009 macbook A1342. I replaced the uppercase, keyboard,and trackpad. All of the other parts are original. Since then, however, I have been without sound. The volume controls when pressed are dimmed and when I go into system preferences their are no output devices found. When I rebuilt the machine I saw no burns or anything that would indicate that any damage has happened to the MOBO, but I'm no expert. I was hoping someone knows the answer to this puzzle. Even if I can't fix it I would love to at least get a diagnosis.

Thanks

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

If SystemProfiler->Audio does not identify the ports then they are damaged. Get a magnifying glass and check (both sides) the logic board for corrosion and/or burn marks... cleaning may help corrosion - otherwise it's live without sound or replace the logic board. (IMnsHO Soldering Logic Board components is not the "average" DIY sort of repair it requires special solder, tools & experience it's easy to thrash a board).

A workaround is to get a USB audio dongle... USB sound often works when the analog ports do not.

If this Answer is helpful please remember to return and mark it Accepted.

Cette réponse est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire

Options

i tried everything to try fix my 'no output device found' problem.

reinstalled twice even

in the end his technique worked for me

i've edited it a bit to make it easier to do it correctly

Step One: Open Applications.

Step Two: Find Utilities folder and open.

Step Three: Find the Audio MIDI Setup icon and open.

Step Four: on the MIDI page there will be the IAC Drive. If it Greyed Out, Select and click on “Add Devices”.

Step Five: double click on the IAC Drive, If the word BUS is in this box select and remove.

Step Six: Make sure that the “Device is online” is checked. Your IAC Driver Icon should be all red.

FINALLY RESTART.

I really hope this fixes the problem for others as it's immensely frustrating!

Good luck

Cette réponse est-elle utile ?

Oui Non
Indice 0

1 commentaire:

Hi I tried your method but I'm stuck on Step 5 the word IAC Drive doesn't seem to appear in my macbook. Any clarification would be much appreciated. Thank You

par

Ajouter un commentaire

Ajouter une réponse

sam lane sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 2,942