Réparez vos affaires Communauté Boutique

Commercialisée en novembre 2020, la console PS5 présente des graphismes hautement évolués et une nouvelle manette Dualsense innovante. Ce nouveau thème spatial noir et blanc témoigne d'un changement notable par rapport aux anciens designs de PlayStation.

191 questions Voir tout

Options

HDMI torn from board and damaged traces

I acquired a ps5 that had a claim of a bent hdmi port, but was definitely more than that. Hdmi port was broken off the board and the many of the pads and traces are damaged or missing. I was going to try and run new traces but I'm, 1 not sure if it's too far gone and 2 was wondering if the routing on the board is the same on both versions of the motherboard EDM-010 And EDM-033. here on ifixit you can see the EDM010 BUT NOT 033

Block Image

Block Image

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
2 commentaires

Not a slim, and having a he'll of a time removing all that solder

par

@rguilmette1977 hmm, it’s probably a new revision then. Yes.. this need to be removed first before you can proceed to the repair part. Hopefully you can repair this board!

par

Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

someone has been working on that before, you can tell with all that damage and the uv mask

Cette réponse est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire

Options

Hi Rob!

Oh dear, this motherboard do have some serious damage there. It’s very difficult to repair this one. But the only thing left to do is to run new traces.

Is this the PS5 Slim version by any chance?

it’s easier to replace this motherboard as the HDMI port is completely ripped off the hard way…

Cette réponse est-elle utile ?

Oui Non
Indice 1

2 commentaires:

Not sure what solder they used, but it's a nightmare trying to wick up. My wick keeps soldering to the board and the solder goes nowhere. I even cranked up the temp on my iron

par

Did you tried to put some fresh solder on your wick? Perhaps the old solder will come along in the copper wick as well. Also try some flux to get it off.

par

Ajouter un commentaire

Ajouter une réponse

Rob G sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 15

30 derniers jours : 24

Total : 56