Réparez vos affaires Communauté Boutique

Repair guides and support for your Philips TV.

254 questions Voir tout

Options

TV doesnt power on the backlight.

Hi guys! Recently i bought a Philips 58PUS6203/12 TV and i don't have a picture but i have sound. I can turn it on with the remote and i saw the leds blinking in the back when i turned it on. I tested the backlight with a tester and it was okay with the plug i disconnected from the power supply board. Then while the tv was on i plugged back in after i powered the backlights on with my tester. Then it was giving me a picture after i plugged back into the power supply board. I was like okay now its working. I pulled out the cable from the ps board and i put it back together. After that it wasnt working again correctly. My guess that its a power board issue. What do you guys think? I checked a few parts with my multimeter.

Update (05/27/24)

Block Image

Block Image

These are the pictures what i can show rn and i have on my phone. It seems like its burned for me.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

Hi @patriknemeth

Did you check the soldering on the PSU board connectors where you pulled the cable out from? Also checked the ends of the cable itself for corrosion etc?

Here's the service manual for the TV that may help.

On p.57 (of 103) there's the schematic of the PSU board for your model. Hopefully that may help you to isolate where the problem is.

Cette réponse est-elle utile ?

Oui Non
Indice 2

3 commentaires:

Yess i checked, but one of the transistor had a burn near its feet. It was nearby the connection of the led aswell.

par

@patriknemeth

The picture is too blurry to see if it is or not especially when zooming in

Either the transistor is overheating or it is faulty. Remove it and test it to check.

If faulty, the transistor model number or type should be should in the schematic. Look for the transistor's board designation to find it in the schematic. It should start with a "Q"

par

@jayeff

Oh and i forgot to mention that it has a ticking sound as well. I don't know if its normal. I posted some images as an answer here.

par

Ajouter un commentaire

Ajouter une réponse

Patrik Németh sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 36