Aller au contenu principal
Aide

Version actuelle par : PWnS2009

Titre:

ASUS P8H61-M LX3 Plus R2.0 No display on this motherboard?

Texte:

i've been messing with my computer for a bit, but for some reason it's just decided to stop showing any display on the screen. at all.
i don't see any reason it would as it just happened while i was messing in the BIOS, and the settings weren't saved yet. and yes, i've attempted to reset the BIOS settings through the manual's jumper method and removing the CMOS battery, but all it did was make the computer confused on startup. i've also attempted to just have it run for a long time in desperation, but no change
edit: before someone asks, No, i don't think the computer isn't booting as i know it is (the hard drives were warm when i opened it up one time), it's just refusing to make an output for no reason
+
+edit edit: i should elaborate: by confused, i mean it's turning off and turning back on in an attempt to properly boot (which it eventually does... still without display output)

Appareil:

Motherboard and CPU

Statut:

open

Modifié par : PWnS2009

Titre:

ASUS P8H61-M LX3 Plus R2.0 No display on this motherboard?

Texte:

i've been messing with my computer for a bit, but for some reason it's just decided to stop showing any display on the screen. at all.
i don't see any reason it would as it just happened while i was messing in the BIOS, and the settings weren't saved yet. and yes, i've attempted to reset the BIOS settings through the manual's jumper method and removing the CMOS battery, but all it did was make the computer confused on startup. i've also attempted to just have it run for a long time in desperation, but no change
+
+edit: before someone asks, No, i don't think the computer isn't booting as i know it is (the hard drives were warm when i opened it up one time), it's just refusing to make an output for no reason

Appareil:

Motherboard and CPU

Statut:

open

Modifié par : PWnS2009

Titre:

ASUS P8H61-M LX3 Plus R2.0 No display on this motherboard?

Texte:

i've been messing with my computer for a bit, but for some reason it's just decided to stop showing any display on the screen. at all.
-i don't see any reason it would as it just happened while i was messing in the BIOS, and the settings weren't saved yet. and yes, i've attempted to reset the BIOS settings through the manual's jumper method and removing the CMOS battery, but all it did was make the computer confused on startup
+i don't see any reason it would as it just happened while i was messing in the BIOS, and the settings weren't saved yet. and yes, i've attempted to reset the BIOS settings through the manual's jumper method and removing the CMOS battery, but all it did was make the computer confused on startup. i've also attempted to just have it run for a long time in desperation, but no change

Appareil:

Motherboard and CPU

Statut:

open

Modifié par : jayeff

Titre:

-No display on this motherboard?
+ASUS P8H61-M LX3 Plus R2.0 No display on this motherboard?

Texte:

i've been messing with my computer for a bit, but for some reason it's just decided to stop showing any display on the screen. at all.

i don't see any reason it would as it just happened while i was messing in the BIOS, and the settings weren't saved yet. and yes, i've attempted to reset the BIOS settings through the manual's jumper method and removing the CMOS battery, but all it did was make the computer confused on startup

Appareil:

-ASUS P8H61-M LX3 Plus R2.0
+Motherboard and CPU

Statut:

open

Contribution d'origine par : PWnS2009

Titre:

No display on this motherboard?

Texte:

i've been messing with my computer for a bit, but for some reason it's just decided to stop showing any display on the screen. at all.

i don't see any reason it would as it just happened while i was messing in the BIOS, and the settings weren't saved yet. and yes, i've attempted to reset the BIOS settings through the manual's jumper method and removing the CMOS battery, but all it did was make the computer confused on startup

Appareil:

ASUS P8H61-M LX3 Plus R2.0

Statut:

open