Réparez vos affaires Communauté Boutique

Abask J05 Front Case Replacement

Ce dont vous avez besoin

  1. Abask J05 Front Case Replacement, Front Case: étape 1, image 1 de 2 Abask J05 Front Case Replacement, Front Case: étape 1, image 2 de 2

    • Gently press on the SD card with a fingernail until it clicks.

    • Release, then remove the card.

    Modifier

  2. Abask J05 Front Case Replacement: étape 2, image 1 de 1

    • Remove the 5 mm screw from the side of the device next to the suction cup dock with a Phillips #00 screwdriver.

    Modifier

  4. Abask J05 Front Case Replacement: étape 3, image 1 de 2 Abask J05 Front Case Replacement: étape 3, image 2 de 2

    • Remove the two 8 mm screws from opposite sides of the screen with a Phillips #00 precision screwdriver.

    Modifier

  5. Abask J05 Front Case Replacement: étape 4, image 1 de 2 Abask J05 Front Case Replacement: étape 4, image 2 de 2

    • Gently lift the screen.

    • Push up on the interior camera portion of the device. It should pop out of the socket. Being careful to keep the wires attached, set it to the side.

    Modifier

  6. Abask J05 Front Case Replacement: étape 5, image 1 de 2 Abask J05 Front Case Replacement: étape 5, image 2 de 2

    • Reach into the device with a spudger to release the top two snap joints keeping the end cap attached one at a time until the front face lifts off.

    • Be careful not to touch the screen.

    • Repeat the process with the two remaining snap joints.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

Kristen Gismondi

Membre depuis le 11/12/14

85 242 Réputation

215 tutoriels rédigés

Badges: 46

+ 43 badges supplémentaires

Équipe

iFixit Membre de l'équipe iFixit

Staff

140 membres

18 065 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 13