Introduction

In order to remove the RAM you first need to remove the battery.

Pièces

Aucune pièce nécessaire.

Loosen the top left and top right 6.5mm PH1 screws that hold down the back cover.
  • Loosen the top left and top right 6.5mm PH1 screws that hold down the back cover.

  • The screws will not be able to be removed from the back cover. They can only be loosened or tightened.

Ajouter un commentaire

Slide back cover forward using your thumbs.
  • Slide back cover forward using your thumbs.

Ajouter un commentaire

  • Lift up the cover and set aside exposing the internals of the computer.

Ajouter un commentaire

  • Unscrew the two 6.35 mm using the PH1 screw driver.

Ajouter un commentaire

  • Lift the plate and remove it to uncover the RAM sticks.

Ajouter un commentaire

  • Push outward on the prongs that secure the RAM stick in the slots.

  • After releasing the prongs the rams stick will rise up.

Ajouter un commentaire

  • Be very gentle in this step, making sure to not damage anything.

  • Pull the RAM stick out of its housing.

Ajouter un commentaire

  • Push outward on the prongs that secure the RAM stick in the slots.

  • After releasing the prongs the rams stick will rise up.

Ajouter un commentaire

  • Be very gentle in this step, making sure to not damage anything.

  • Pull the second ram stick out of its housing.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Andonaq Grozdani

Membre depuis le 01/03/2018

718 Réputation

5 tutoriels rédigés

Équipe

UMass Dartmouth, Team S2-G2, Simcock Spring 2018 Membre de l'équipe UMass Dartmouth, Team S2-G2, Simcock Spring 2018

UMASSD-SIMCOCK-S18S2G2

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 6

Total : 54