Introduction

If the Astro A20 will not turn on or the battery will not charge then you will need to replace the battery.

Pièces

Aucune pièce nécessaire.

  1. Place one hand on the hard side of the headset ear portion and on the cushion.
    • Place one hand on the hard side of the headset ear portion and on the cushion.

    • Lift the small portion on the edge of the cushion.

  2. Slide the metal spudger underneath the lift part of the ear cushion.
    • Slide the metal spudger underneath the lift part of the ear cushion.

    • Pull the ear cushion while wedging the spudge around the edge of the ear cushion.

    • Remove the ear cushion from the headset.

    • Place hand on the opposite side of the speaker.

    • Remove the four 7mm screws with a Phillips #1 screwdriver.

    • You may want to use a 60mm screwdriver extension to reach the screws inside of the headset.

    • Lift and remove the speaker from the headset.

    • Remove the two 7mm screws with a Phillips #1 screwdriver.

    • Lift the motherboard to expose the battery.

    • Remove the battery with a plastic spudger.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jasmine Yarbrough

Membre depuis le 10/09/2018

579 Réputation

5 tutoriels rédigés

Équipe

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 15

30 derniers jours : 75

Total : 97