Blade Removal Technique

Pour réparer ensemble - Je crée un compte

Introduction

This guide will show you several blade removing techniques for when the blades are stuck somewhere on the motor of your Ninja Master Prep QB900B.

Be sure to have a tough cloth or a cut resistant glove on hand for the repair. In addition, make sure to turn off the device and unplug from the power outlet before beginning this repair.

Ce dont vous avez besoin

1. Étape 1 Blade Removal Technique
  To remove the blades from each other, twist both blades in opposite directions and pull.
  
  Be cautious, the blades are sharp.
  Traduire
  
  Demander à FixBot
  
  Ajouter un commentaire
  
  1024
3. Étape 2
  To remove the blades from the cup. Firmly grasp the bottom of the cup.
  
  Be careful when you are doing this next step.
  
  Pull upward as shown on the top of the blades.
  Traduire
  
  Demander à FixBot
  
  Ajouter un commentaire
  
  1024
4. Étape 3
  To remove the blades from the motor, firmly grasp the motor top.
  
  Next. Take a cloth or cut-resistant glove and grasp the blades.
  
  Be careful during this next step.
  
  Now twist both ends in opposite directions to separate.
  Traduire
  
  Demander à FixBot
  
  Ajouter un commentaire
  
  1024