Introduction

This guide shows how to remove the back cover, remove the battery, and locate the model number. No tools are required.

  1. Turn the phone so it is face (keypad) down.
    • Turn the phone so it is face (keypad) down.

  2. Press and hold the button located at the bottom of the phone. Slide the back of the phone downwards and away from the main body. Remove the backing and place it to the side.
    • Press and hold the button located at the bottom of the phone.

    • Slide the back of the phone downwards and away from the main body.

    • Remove the backing and place it to the side.

  3. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  4. Locate indentation from which battery can be removed. Place finger in indentation and lift battery up from phone's body. Remove battery from phone's body.
    • Locate indentation from which battery can be removed.

    • Place finger in indentation and lift battery up from phone's body.

    • Remove battery from phone's body.

  5. Read model number and type from back of phone.
    • Read model number and type from back of phone.

Conclusion

To reassemble your device, replace the battery back in the slot, and slide the back cover back into place.

Reid Polstra

Membre depuis le 22/10/2012

1 Réputation

7 tutoriels rédigés

Équipe

Clemson, Team 15-5, Benson Fall 2012 Membre de l'équipe Clemson, Team 15-5, Benson Fall 2012

CLEM-BENSON-F12S15G5

3 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 4

Total : 1,815