Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Flip your device over so the back cover is facing you.
-
Using a Phillips #0 Screwdriver, remove the ten 7mm screws holding the back cover in place.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Insert a plastic opening and run it along the edge of the back cover. Do this until the entire back cover can be removed.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.